Skip to main content

Overview

9Pic Motion finds participants in event footage and gives each one their own video clips. Participants search with a selfie, with their bib number, or both, depending on the search methods you turn on. It is available on Pro, Business and Enterprise; Trial and Pay As You Go show an upgrade prompt. Open 9Pic Motion in your event’s product navigation. It has four tabs: Overview, Configuration, Watermark, and Tools. The Overview works like the Photo Overview: a status summary and four step cards, with the next step marked Up next.

Prepare and Publish Videos

1

Import event videos

After videos are uploaded to this event’s 9Pic Uplink folders, choose Import Videos. This lists the new videos; it does not process them. Re-run import after new uploads. Videos already imported are skipped.
2

Set up your watermark

Optional. On the Watermark Setup card, choose Add Watermark or Skip. Configure Watermark opens the watermark page. Once you save a logo, new participant clips carry it automatically. Generate Preview and View Preview are an optional check of the exact look. If the logo couldn’t be prepared for clips, processing stays switched off until you select Try again on the watermark page.
3

Check orientation and process

Choose Start Processing. The confirmation lists each new video once with a checkbox, all ticked by default; Select all clears or restores them, and an unticked video waits for a later run. Only ticked videos are priced and processed, up to 50 at a time; when more are waiting, the first 50 are ticked. Each row shows its length, size, orientation and cost (Free, a number of credits or Already paid); choose Check to open one and fix its orientation. Below the list are the Credits required and your Available balance, with your rate in a note. Confirm with Process N videos; it stays off until at least one video is ticked and you have enough credits (see Processing credits). If only failed videos are left, the card offers Retry Failed instead, with the same cost check; it retries up to 50 failed videos per run.Processing does only what your saved search methods use. Processing prepares shows which: Video clips always, Selfie search when Selfie Search is on and BIB search when Find bibs automatically is on. One that is off is struck through, with a Change in Configuration link. With only CSV clips on, videos are prepared for clipping only. Save your search methods first. Turning Selfie Search or Find bibs automatically on after a video was prepared for clipping only needs a Reprocess of that video (see below).
4

Publish Motion

Once at least one video is processed, choose Publish and confirm. The event goes live and participants can search for their clips with the search methods you saved. Use RePublish after processing more videos, or Unpublish to turn video search off. Unpublish also moves the event back to draft unless photos are published.
The summary above the steps shows how many videos are new, in progress, failed, and completed. It updates automatically during active work; Refresh checks it manually.

The Videos Window

Choose Manage on the Import Videos card or View Videos on the Process Videos card. Search and filter the list (All, New, In progress, Failed, Completed), then select a video to watch it in the same window. All videos takes you back to the list. To fix a sideways video, use Rotate left or Rotate right, then choose Save orientation. Turning only changes the preview until you save. If you leave with an unsaved turn, you are asked to save or discard it.

Processing credits

Processing a video uses your organisation’s credits. Each video costs its length in whole seconds, rounded down, times your rate: 1 credit per second unless your organisation has an agreed rate. For example, a 61.3-second video costs 61 credits.
  • Before anything starts, every processing confirmation shows each video’s length and credits, the Credits required, your Available balance and your rate. A video can also show Already paid (a failed run whose credits are still held), In progress or Free.
  • Not enough credits: the confirmation says how many more you need and offers Add Credits. A batch needs credits for every video in it; nothing is charged until it can all start.
  • Length couldn’t be measured: videos are measured when you import them. If a video says “Length couldn’t be measured”, choose Import Videos again, or email support@9pic.ai if it still can’t be measured. Other videos still start.
  • Refunds: if processing fails for good, or you cancel a queued video, its credits come back automatically. Retrying a failed video doesn’t charge again while its credits are still held.
  • Reprocessing a finished video is charged again for its length. Reading bib numbers again from videos that are already processed is free.
Charges appear in Credits & Billing → Usage report (and in Recent activity on the Overview tab) as Video Processing, and refunds as Video Processing refund.

Reprocess a video

Reprocess runs a processed video again from the start with your current settings. Use it when a video was processed before you turned on a search method, for example a video prepared for clipping only before you turned on Find bibs automatically.
1

Open Reprocess

Choose Reprocess Videos on the Process Videos card, or Reprocess on a ready video in the Videos window. The card also tells you how many videos were processed with no search on.
2

Pick the videos

Tick the videos to run again. From the card, videos processed with no search on are already ticked and marked “needs reprocessing”. From a video’s page, only that video is ticked.
3

Start

Read what will happen, what processing prepares and what it costs, then choose Start Reprocessing. Each video is charged again for its length. Cancel or Back starts nothing.
Until a video finishes reprocessing, participants can’t play it or find clips in it. Its faces and bib numbers are found again from scratch, and it takes about as long as the first processing. Your other videos aren’t affected. When it finishes, choose RePublish on the Publish Videos card.
Orientation locks once processing starts. Check every new video before you confirm processing.

Configuration

The Feature Configuration card controls how participants find, watch and download videos. A menu on the left (a row across the top on a phone) shows one section at a time:
  • Search methods: how participants find their clips.
  • Clips from your CSV: your bib clips. It appears indented under Search methods, with the clip count, while Bib Number Search and Clips from your CSV are both on.
  • Clips: how each clip is cut. The menu shows the clip length you chose.
  • Viewing and downloads: what participants can watch and download.
Changes in every section apply when you choose Save changes on the bar that appears. Discard undoes them. A published event must keep Selfie Search or Bib Number Search on; the page won’t save with both off. With All videos on, participants who pick Video Clips see a player and a grid of every processed video, in upload order, in place of the photos. Your Motion watermark logo shows over the player while they watch; the video files stay clean, so Full video downloads give the original video. All videos is hidden from participants while video clip selling is on in 9Pic Checkout, so full videos never give away the clips you sell.

Clip length and multiple clips

Open Clips to choose how each participant’s clip is cut. Short, Medium and Long are fixed. Choosing one also resets matching to the defaults: 90% match confidence, a 2 s shortest appearance and gaps of up to 1 s joined. Choose Custom to set your own numbers in Custom length and matching: Match confidence (%), Start padding (s), End padding (s), Shortest appearance (s), Join gaps up to (s) and Longest clip (s). Start from Short, Medium or Long copies that preset’s numbers so you can adjust them. Higher confidence means fewer wrong matches but more missed ones. While you edit, your Custom numbers are kept, so if you try a preset and then choose Custom again, they come back. Only the clip numbers are saved: next time the tab shows the preset they match, otherwise Custom. Turn on Multiple clips per video only if the same person can appear more than once in a video, such as on a lap course. When it’s off, each video gives the person their earliest appearance. When it’s on, each video gives every separate appearance, in time order. This applies to selfie clips and to bibs found automatically. Keep clips for sets how long clips stay available, at least 30 days. Clips from your CSV always use your exact start and end times, so Clip length doesn’t change them. Under Bib Number Search, turn on at least one of Find bibs automatically and Clips from your CSV; the page won’t save bib search with neither. With both on, your CSV is used for any video where it has that bib, and bibs found automatically fill in the other videos.

Bibs found in your videos

Turn on Find bibs automatically and choose Save changes. Videos processed from then on are read for bib numbers while they process. The Bibs found in your videos card is on the Motion Tools tab. Until Find bibs automatically is saved on, the Tools tab says so and offers Go to Configuration.
1

Read videos you processed earlier

Saving never starts reading by itself. If videos were processed before, the card lists them as Not read yet. Choose Read bib numbers in N videos and confirm with Read bib numbers. Bib numbers are read from the frames already saved, so nothing is uploaded or processed again; it takes about a minute per video and the card updates by itself. Use Try again for a video that couldn’t be read. A video prepared for clipping only has nothing to read yet: the card marks it Needs reprocessing with Reprocess in Overview, and its bib numbers are read while it reprocesses.
2

Check the bibs found

Searchable lists the bibs participants can find, with the frames seen, the read quality (Clear, Good or Fair read), the videos and times, and a close-up. Use Search bib, the video filter and Bib number / Most seen sorting. Select a bib to see its frame with the bib boxed, where each video’s clip comes from (Your CSV, Found or Hidden) and how many clips participants get.
3

Review hidden bibs

Hidden lists readings that can’t be searched, with the reason: Looks like a misread of another bib, Not on your participant list, Seen in only one frame or Seen too briefly to be sure. If a hidden bib is a real runner, add it to your CSV.
Detection settings (folded at the bottom of the card) save with their own Save and update list:
  • Participant list: Use it when uploaded (recommended), Always (only bibs on the list; nothing is searchable without one) or Never. Your list is the bibs with a name from the Name Search CSV in Photo configuration, or with results data.
  • Seen in at least: 2 frames (recommended) or 3. A bib seen once is usually a misread; 3 frames can miss fast runners. A single very clear reading counts only when a participant list filters.
  • Read quality: ignore readings below this; 90% is recommended.
Saving rebuilds the list from the readings you already have; nothing is read again. Rebuild list does the same without a change, for example when the card says the list needs a rebuild.

Clips from your CSV

Turn on Clips from your CSV under Bib Number Search (turning on Bib Number Search turns it on when Find bibs automatically is off) and choose Save changes. An upload panel appears right under the switch, with Download template, Upload CSV, a summary of your clips and View and manage N clips, which opens the Clips from your CSV section. That section lists your clips and has the same upload buttons. Uploads and other actions there save straight away; they aren’t part of Save changes. You can upload before you save the switch: the panel reminds you to save to turn on CSV clips.
  1. Choose Download template. It has one row per video with its video ID and an empty bib.
  2. Fill one row per bib and appearance: bib_number, video_source (the video ID, or the exact file name), start_time, end_time and an optional label. For example:
    Use the video IDs from your own template: 37 here is a video ID, 03_closeups.mp4 a file name used by only one video in the event, and the rows show the three time forms below.
  3. Times are positions in that video file, such as 00:01:02, 01:02 (minutes and seconds) or 62 seconds. Clock times, dates and time zones are rejected. A clip can be up to 10 minutes. Format the time columns as text in your spreadsheet so 01:02 isn’t turned into a clock time.
  4. Choose Upload CSV, pick the file and, if you already have clips, Replace all clips or Add to current clips. Choose Check file: you see rows ready, rows with problems (with the row number and the reason), duplicates and warnings, plus a preview. Nothing is saved yet.
  5. Choose Import N clips (or Replace with N clips). Rows with problems are skipped.
Files can be up to 5 MB and 50,000 rows, and an event can hold 50,000 clips. Use the bib search and the video chips to find clips, Remove last import to undo the most recent upload, or Delete all clips. If you upload a video again, clips on the old video are flagged; upload the CSV again with the new video’s ID.

Prepare clips ahead

How participants get these clips at the top of the Clips from your CSV section has its own Save:
  • Cut when searched (default): each clip is cut the first time someone opens it, so participants wait a few seconds.
  • Prepare ahead: every clip is prepared in the background, so participants get it instantly. Set Keep prepared clips for 30 to 365 days (default 30). After that, clips are cut when searched again.
Choosing Save and prepare N clips starts at once, and new imports are prepared automatically. Clips are prepared at about one every 2 seconds. A strip shows how many are ready and refreshes by itself, and the Status column and status chips (Ready, Preparing, Waiting, Failed, Needs update, Expired) filter the list.
  • Retry N failed tries failed clips again.
  • Update N clips prepares again the clips marked Needs update, after you change the watermark, clip selling, preview quality, clip downloads or the number of days, or upload a video again. Changing the days doesn’t extend existing clips.
  • Prepare N again prepares expired clips again.
Until a clip is ready, participants still get it: it is cut when searched. Switching back to Cut when searched deletes nothing; prepared clips stop being used and expire on their own. Deleting or replacing clips removes their prepared clips too.

What participants see

Once Bib Number Search is saved on and there is at least one CSV clip on a current video or one searchable bib found in a processed video, picking Video Clips in your gallery shows a bib field straight away, with Find my videos next to Find with selfie (when Selfie Search is on), the same layout as photo search.
  • Participants type their bib. Letters, digits, spaces, / and - work, and case doesn’t matter, but leading zeros do: 0123 and 123 are different bibs.
  • They get one clip per CSV row for that bib, cut at your exact start and end times (Clip length doesn’t apply), up to 20 per bib.
  • For a bib found automatically, each video gives the bib’s earliest pass, or every pass with Multiple clips per video on, cut with your Clip length, up to 20 clips per bib. A video where your CSV has that bib uses the CSV instead. Hidden bibs give no clips.
  • With Cut when searched, clips are made the first time anyone searches that bib, so the first search takes about a minute. With Prepare ahead, ready clips appear instantly. Everyone who searches the same bib gets the same clips.
  • If a video isn’t ready yet, participants see “Videos are still being prepared” and can try again. A bib with no clips shows “No clips found”.
  • Bib clips use the same watermark, preview quality, Purchase original videos button and checkout as selfie clips. Clips are priced per clip, so a long clip costs the same as a short one.
After you upload a new CSV, change the watermark or replace a video, the next search makes fresh clips. With Selfie Search on, a participant who searches photos with a selfie also sees Find videos with selfie on their photo results, which opens their clips with the same selfie. A bib number photo search finds photos only; for bib clips, participants pick Video Clips. Use Video name search when each participant has their own edited video of up to 3 minutes (for example RAHUL_SHARMA_1234.mp4). Participants type a name or bib from the video’s name and get that whole video as one clip, with no selfie. Keep selfie and bib search for long footage with many people in it.
1

Choose the mode

Open Configuration, then Search methods, choose Video name under How participants search, and select Save changes. Confirm “Turn on video name search?”. Selfie Search, Bib Number Search and All videos turn off and stay off while it is on. You can’t switch while videos are processing. If your event has 40 or more videos of about 3 minutes or less, the Overview suggests it; Not now hides the suggestion on that browser for that event.
2

Check the search names

Each video’s search name starts as its file name without the extension. Open Configuration, then Video names (it appears once the mode is saved), then Open Videos, and use the pencil on a row to rename a video (1 to 100 characters). To change many at once, choose Rename from CSV: download the template, edit the search_name column, upload it, review the check, and select Import. Nothing is saved until you import, and renaming keeps a video’s prepared clip.
3

Process the videos

Start Processing works as usual, with these differences: there is no orientation step, every new video up to 3 minutes starts in one go, and longer videos are skipped (“Longer than 3 minutes”), as are videos under 1 second (“Shorter than 1 second”). Processing costs 0.4 credits per second, at least 1 credit per video, unless your organisation has its own rate. If you see “Processing was requested. Refresh in a minute to see progress.”, nothing failed: refresh after a minute. Clips are prepared automatically, so participants get them instantly.
Participants see one Search your video field with Find my videos. The words they type must be the whole name or an unbroken run of whole words in it (“rahul sharma” or “1234” finds RAHUL_SHARMA_1234; “rah” finds nothing). Case, underscores, dashes and dots don’t matter; they need at least 2 characters and see up to 20 videos, each labelled with its search name. Clips are sold like any video clip. A clip pass bought before the event covers only the videos whose full name matches what the buyer searches; a pass tied to a bib works by searching a name that contains that bib.
To switch back to selfie and bib search, choose People in the videos and save. Videos processed for video name search were prepared for clipping only, so selfie and bib search can’t find anyone in them until you Reprocess them, which is charged again. Selfie Search and Bib Number Search stay off until you turn them on.

Tips for Good Clips

  • Camera angles matter more than for photos. A finish-line camera that sees faces head-on gives far better selfie clips than the same footage shot from above. For bib clips, bib numbers must be readable in the frame.
  • Trim footage before uploading. Upload only the stretches where participants pass, such as the finish or start line. Processing is charged per second of video, so shorter footage is faster and uses fewer credits.
  • Test with one camera first. Process one camera’s videos, check the clips for a few real participants, then process the rest.

Watermark

Open the watermark page with Configure on the Watermark tab’s Watermark card, or from the Watermark Setup card. Choose what the watermark does:
  • Show my brand puts your logo on videos. Pick the image, position, opacity and size, and check it in the live preview.
  • Protect videos for sale repeats copyright text across videos until they are bought, using the same AI-resistant text overlay as Photo: choose Recommended or Custom in Create text overlay, then Generate. Any organiser can choose it; selling videos in 9Pic Checkout is up to you. Once saved, new participant clips carry the copyright text over the whole frame, landscape or portrait, and buyers get a clean video or one that keeps your logo, as set under 3. After purchase.
For copyright text, step 3. After purchase chooses what buyers get: a Clean video, or Keep my logo. Choose Save watermark to apply. There are no switches for where the watermark shows. A saved logo goes on new participant clips automatically, and a downloaded clip keeps it. On the All videos page it shows over the player while participants watch (turn All videos on or off in Configuration); full video downloads are always the original file. You don’t need to generate a preview first. If the logo can’t be prepared for clips, your watermark is still saved and the page says new clips don’t carry it yet; choose Try again. Changes apply to newly made clips and videos; earlier clips are not changed.

Common Questions

Import must finish and at least one video must complete processing. Check the Overview pipeline for the first incomplete step and wait for active work to finish.
9Pic Flow creates personalised reels from templates and event media. Motion lets participants find their own moments in source footage by selfie or bib number.
Yes. The 9Pic API offers the same selfie and bib clip searches your gallery uses, with the same clips, watermark and download settings. See Video Clipping Search. API keys are part of the Business plan.
On Business and Enterprise, add a Video clips price to the post-event 9Pic Checkout package, or a clip pass to the pre-event package that participants pre-book before you publish the videos; publishing it puts clips on sale, and pausing it stops clip sales. You can price clips as soon as Motion is on for the event in Event Config; they go on sale once a watermark is saved (a logo, or copyright text with Protect videos for sale); no video needs to be processed first.

Next Steps

9Pic Flow

AI-generated highlight reels.

Event details

How products and tabs work inside an event.