> ## Documentation Index
> Fetch the complete documentation index at: https://docs.9pic.ai/llms.txt
> Use this file to discover all available pages before exploring further.

# Manual Tagging

> Add missing bibs, remove wrong bib tags, and attach context tags to photos from the Tools tab.

## Overview

The **Tools** tab is a launcher. It shows a grid of tool cards, and clicking one opens that tool on its own full page. There are three tools:

| Tool | What it does |
| - | - |
| **Manual Tagging** | Add missing bib numbers to photos, or remove wrong ones |
| **Manual Context Tagging** *(Beta)* | Attach canonical context tags (for example sponsor names) to photos |
| **AI Image Analysis** | Review and fix photos flagged for rotation — see [AI Image Analysis](https://docs.9pic.ai/products/photo/ai-analysis.md) |

This page covers the two tagging tools.

![Photo Tools launcher showing Manual Tagging, Manual Context Tagging Beta, and AI Image Analysis cards](https://assets.9pic.ai/docs/dashboard-guide/photos/tools-launcher.webp)

Photo Tools launcher

## Manual Tagging (Bib Numbers)

Use **Manual Tagging** for any bib correction on a photo:

* **Add a missing bib** when the bib was blurred, hidden or at an unusual angle.
* **Remove a wrong bib or tag** when a photo shows up under a bib it shouldn't, for example a misread number or a bib from the background.

Corrections are made one photo at a time on this screen. Photos appear here once they are processed and published.

### Find the photo

The toolbar at the top gives you three ways to find photos. Only one applies at a time, and the active one shows as a chip you can clear with **×**.

| Control | What it does |
| - | - |
| **Search box** | Type a bib number (for example `1042` or `A123`) to see every published photo for that bib, or paste a 9Pic image link or image ID to jump to one exact photo. The box works out which one you typed; use the **Bib** / **Image ID** button inside the box to switch if it guessed wrong. |
| **Capture time** | Pick a day, then the whole day or a single hour. Times follow the event's local clock. |
| **Show: All photos / Untagged** | Browse every photo, or only photos with no face or bib match. Untagged photos also carry an **Untagged** badge in the gallery. |

Photos are shown 50 per page. Use **Previous** and **Next** above or below the gallery to move between pages; changing the search starts again at page 1.

Your search, capture time, page and open photo are kept in the page address, so refreshing the page or sharing the link brings back the same view.

### Remove a wrong bib or tag

**1. Open the photo**

Find the photo with the toolbar and click it. The photo opens with boxes around each bib that was read (**Hide boxes** turns them off). To check a small or blurry bib, use the zoom buttons above the photo or double-click it, then drag to move around.

**2. Switch the wrong bib off**

Under **Found in this photo**, each detected bib is listed with how it was read and how confident the match is. Turn off the **In search** switch next to the wrong bib. It is marked **Removed** and its box turns dashed. Turn the switch back on to undo.

**3. Remove a tag you added**

Tags added by hand are listed under **Tags you added**. Click the **×** on a tag to remove it.

**4. Save and republish**

Click **Save**, or **Save & next** to save and move to the next photo. Then republish the event so participant search stops showing the photo under that bib.

### Add a missing bib

**1. Open the photo**

Search by capture time or open **Untagged** to find photos with no bib, then click the photo.

**2. Add the bib**

Under **Tags you added**, type the bib number and press **Enter** (or click **Add**). You can add up to 50 tags per photo.

**3. Save and republish**

Click **Save** or **Save & next**, then republish the event. The photo becomes searchable under the new bib.

> [!NOTE]
>
> Changes are not visible to participants until you republish the event. If you leave a photo with unsaved changes, 9Pic asks before discarding them.

> [!TIP]
>
> Bib removed by mistake? Open the photo again and switch the bib back on. Bibs you removed earlier that are no longer detected are listed under **Removed earlier, no longer found** with a restore button.

> [!TIP]
>
> If many photos share the same misread, adjust bib detection in [Configuration](https://docs.9pic.ai/products/photo/configuration.md) to reduce misses on the next event.

## Manual Context Tagging (Beta)

> [!WARNING]
>
> Manual Context Tagging is a **Beta** tool. It's stable enough to use, but the interface may change.

**Context tags** are canonical labels — sponsor names, zones, or other categories — attached to photos so participants can find them by context, not just by face or bib. The tool is lookup-based: you search for an image, select it, and edit its context tags in a dialog.

**1. Open the tool**

Go to **9Pic Photo → Tools** and click **Manual Context Tagging**.

**2. Look up an image**

Use the lookup panel to search and select the photo you want to tag.

**3. Edit context tags**

In the tag editor dialog, add or adjust the canonical tags for that image, then save.

## Common Questions

> [accordion] Will manual tags overwrite the AI's tags?
>
> No. Bibs you add are combined with the bibs 9Pic detected. To take a detected bib away, switch it off under **Found in this photo**; this hides it from participant search without deleting the photo.

> [accordion] A participant's search shows someone else's photo. How do I fix it?
>
> Search for the participant's bib in **Manual Tagging**, open the wrong photo, switch that bib off under **Found in this photo** (or remove it from **Tags you added**), save, and republish the event.

> [accordion] Do participants see context tags directly?
>
> Context tags power context-based search and grouping on the event page. They are canonical labels you control, so keep them consistent (for example, one spelling per sponsor).

> [accordion] Can I correct many photos quickly?
>
> Open the first photo in your results and use **Save & next** to move through them one by one. For corrections across a whole event, fix bib detection in Configuration before reprocessing.

## Next Steps

> [card] [AI Image Analysis](https://docs.9pic.ai/products/photo/ai-analysis.md)
>
> The third Tools entry — review and fix rotated photos.

> [card] [Configuration](https://docs.9pic.ai/products/photo/configuration.md)
>
> Tune bib detection so the pipeline misses fewer bibs.


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.